Toronto homes can make interior door replacement more complicated than the product catalogue suggests.
A door in a renovated bungalow may need to work with new flooring and an older opening. A century home may have plaster walls, settled framing and jambs that are no longer square. A modern infill may have tall solid-core doors where every reveal and casing line is easy to see. A condo or townhome may have limited working space, elevator rules or openings that do not accept a standard retail door package.
That is why good interior door installation starts with the opening.
Wood Job Finish Carpentry provides owner-led interior door installation in Toronto, including slab door replacement, prehung doors, solid-core doors, shaker doors, glass doors, French doors, closet doors, custom jambs, casing, hinge preparation, latch alignment and detailed fitting inside existing homes and renovations.
The work is led hands-on by Jack Cenk Ozer. The door, jamb, hinges, latch, strike plate, casing, floor clearance and wall condition are considered together so the finished opening works properly and looks connected to the room.
★★★★★
69 Google Reviews.
Earned One Job at a Time.
Real projects. Real homes. Real customers.
Wood Job Finish Carpentry has earned trust through owner-led interior door installation, solid-core door replacement, custom jamb work, casing, glass double doors and careful finish carpentry inside real homes.
Toronto door projects often involve renovation layers, older jambs, uneven plaster, flooring changes, narrow openings or tall doors that need more than a standard installation approach.
Many clients mention the same things: careful fitting, clean work, clear communication, reliability and practical problem-solving when the home does not give perfect conditions.
Interior Door Replacement for Toronto Homes
Interior door replacement can be one focused project or part of a larger renovation.
Some homeowners want to replace dated six-panel hollow-core doors. Some need heavier solid-core bedroom or office doors. Others need casing completed around doors that were already installed. A bungalow renovation may need every door, jamb and trim transition handled together. An older home may need each opening treated individually because no two frames are exactly the same anymore.
A good interior door should not need a special technique to use it.
It should swing smoothly, sit with a balanced reveal and latch without being pushed, lifted or slammed.
The door should also feel visually connected to the home. The casing should frame the opening cleanly. The hardware should sit properly. The bottom clearance should work with the finished flooring. The jamb should support the weight of the slab.
These details are easy to overlook before installation.
They are difficult to ignore afterward.
What Wood Job Checks Before Installing a Door
The old door does not always tell the full story.
A door may rub because the hinges are loose. It may swing open because the jamb is out of plumb. It may refuse to latch because the strike plate is poorly positioned. Uneven gaps may come from a twisted frame rather than the slab itself.
Before recommending a slab door, prehung unit or custom jamb, Wood Job looks at:
- the existing jamb and door stop
- hinge locations and jamb strength
- latch and strike-plate alignment
- floor level and finished flooring height
- casing and surrounding wall condition
- door swing and available clearance
- wall thickness
- whether the opening is square enough to reuse
- the size and weight of the new door
In older Toronto homes, paint buildup, plaster walls and settled framing can change the scope.
In newer renovations, clean simple profiles can make even a small alignment error highly visible.
The approach should follow the real opening.
Slab Door Replacement in Existing Toronto Frames
A slab door is the door only.
It does not come attached to a new jamb. The slab has to be measured, trimmed when necessary, mortised for hinges, bored for the handle and fitted into the existing frame.
This can be a good option when the old jamb is strong, reasonably straight and worth keeping.
Slab replacement may also reduce disturbance to the casing, wall finish and paint around the opening.
But fitting a new slab into an old Toronto frame can require more work than homeowners expect.
Older jambs may be slightly twisted. Hinge mortises may not match modern factory locations. The old door may have been trimmed unevenly over the years to compensate for a sloping floor or settled header.
A new slab starts straight.
The existing opening may not be.
Homeowners comparing the two installation paths can read Slab Door vs Pre-Hung Door: Which One Do You Need for Interior Door Replacement?
If the main question is whether the old frame can stay, see Can You Replace Interior Doors Without Replacing the Frame?
When a New Jamb or Prehung Door Makes More Sense
Keeping an old frame is not always the best saving.
If the jamb is loose, split, heavily painted, twisted or badly out of plumb, installing a new slab into it may carry the old problem into the new door.
A prehung door or new custom jamb may make more sense when:
- the old frame is damaged or weak
- the wall thickness is unusual
- hinge locations have been repeatedly repaired
- the opening has been changed during renovation
- the casing is also being replaced
- the new door is considerably heavier
- the homeowner wants a complete opening upgrade
- the old frame cannot give the new door a clean reveal
A prehung unit still needs careful fitting.
The jamb has to be installed plumb and square within the rough opening. The frame must be shimmed and fastened securely. The door needs final adjustment. Casing still has to meet the actual wall.
In older Toronto homes with plaster or mismatched wall thicknesses, standard jamb material may also need extensions or custom preparation.
Prehung does not remove the need for finish carpentry.
It changes where the fitting happens.
Solid-Core Door Installation in Toronto
Solid-core doors are a common upgrade for bedrooms, bathrooms, home offices and main living areas.
They feel heavier and more substantial than hollow-core builder doors. They usually close with a quieter sound and can help a room feel more private.
The additional weight also makes proper installation more important.
A solid-core door can expose weak hinges, loose jambs and poor alignment that were less noticeable with a lightweight hollow-core slab.
The hinge side needs to be secure. The door may need three hinges depending on its height and weight. The latch needs to line up without forcing the slab. The reveal should remain balanced after the door has settled into the opening.
For homeowners comparing door types, see Should You Replace Hollow-Core Interior Doors With Solid-Core Doors?
Tall Interior Doors and Modern Toronto Renovations
Tall doors can create a clean and more substantial look, especially in renovated homes with higher ceilings or more modern proportions.
But taller doors are less forgiving.
A small hinge error becomes more noticeable across a longer slab. The additional weight puts more demand on the jamb. Reveal lines are easier to compare from top to bottom. Casing has to stay visually straight even when the wall is not.
Wood Job completed a Toronto project involving 7-foot solid interior doors and casing. The taller doors needed careful preparation and fitting so they would sit properly within the finished openings.
A project like this is not only about buying a taller door.
The opening, hinge support, floor clearance, jamb and casing all need to work together.
Glass Double Doors and French Doors
Glass double doors can help separate rooms without blocking light.
They are often used for home offices, dining rooms, living areas and wider interior openings where a single solid door would feel too closed.
Double doors require careful alignment because both slabs are visible beside each other.
The meeting point needs to be consistent. The tops of the doors should align. The glass lines, hardware and bottom clearances make unevenness easy to see.
Materials also do not always arrive together.
In Michael’s Toronto project, Wood Job installed the main solid doors and casing first. The glass double doors had not arrived yet, so that part of the work was completed during a return visit.
That phased approach allowed the main door scope to move forward without rushing the special-order doors.
Renovations do not always follow one perfect sequence. Good planning keeps a delayed product from weakening the rest of the work.
For larger office openings, transoms or room-separation details, see Home Office Doors, Transoms and Room Separation.
Interior Doors in Older Toronto Homes
Older Toronto homes often need more than standard product installation.
A century home may have lath-and-plaster walls, framing that has moved over time, headers that are no longer level and casing profiles installed across several generations of renovation.
The door opening may still be usable.
It simply needs to be read carefully.
In an older opening, Wood Job may need to adjust the slab, correct hinge positioning, prepare a custom jamb or fit casing against a wall that changes depth from one side to the other.
Caulking cannot solve every gap.
Sometimes the material has to be scribed or adjusted to the wall. Sometimes the casing reveal needs to be balanced visually rather than following a badly settled line exactly. Sometimes the old frame is too compromised to reuse.
The goal is not to erase the age of the home.
The goal is to make the new door operate cleanly within it.
Real Little Italy Project: Custom Fitting in a Settled Home
Mario contacted Wood Job during the renovation of an older Little Italy property being prepared for his daughter.
The home had the conditions commonly found in older Toronto construction: settled framing, uneven plaster walls, openings that were out of square and headers that did not follow clean level lines.
The project included a larger interior door and trim package, together with custom work around difficult openings.
Some jamb and casing components had to be prepared for changing wall depths. A low under-stair storage opening also required a custom-sized door solution because a standard door would not fit the available height.
This project is a good example of why older Toronto homes cannot always be approached with standard retail door kits.
The finished work still needs clean lines.
The installation method has to acknowledge what is behind them.
Read the full project story: Interior Doors and Custom Trim in a Little Italy Home
Bungalow Renovations and Flooring Changes
Toronto bungalows are often renovated in stages.
Floors may be changed before the doors. Walls may be opened or re-drywalled. Basement stairs and storage openings may be altered. Old casing may be removed while the jambs remain.
These changes can affect door clearance and frame alignment.
New flooring can reduce the space under an existing door. A replacement slab may need resizing, but removing too much from the bottom can affect the proportions of a paneled door. A jamb that was acceptable before the renovation may no longer line up cleanly with the finished wall.
Wood Job completed a Toronto bungalow renovation for Helder that included solid interior doors, casing, baseboards and custom window extensions.
The door work was part of a larger finish package, so the reveals, trim profiles and transitions needed to work throughout the home rather than being treated as isolated openings.
Read the full project: Doors, Trim and Baseboards in a Toronto Bungalow Renovation
Focused Door and Casing Projects
Not every homeowner needs a full-home trim package.
Some Toronto projects involve only the doors and casing.
Michael’s project focused on 7-foot solid interior doors and the trim around them. Wood Job later returned to install glass double doors when those materials arrived.
This is a useful example of a phased project.
A homeowner may want the doors completed now and baseboards later. One floor may be ready while another part of the renovation is still underway. Special-order doors may arrive after standard doors.
That can work when each stage is planned with the next one in mind.
Read the full story: Toronto Interior Solid Door and Casing Installation
Door Installation in Condos, Townhomes and Occupied Homes
Toronto projects are often completed inside homes where people are already living.
That changes how the work should be organized.
Parking, elevator booking, material access, cutting space and building hours may need to be considered before installation begins. Floors and furniture may already be finished. Dust and noise need to be managed realistically.
Carpentry cannot be completely dust-free.
But the cutting area can be planned, tools can be kept organized, floors can be protected and the work area can be cleaned properly.
This matters even when the scope is only one or two doors.
A focused project still happens inside someone’s home.
Door Casing Around Toronto Openings
Casing is the trim that visually finishes the doorway and covers the transition between the jamb and the wall.
It does more than hide a gap.
Good casing frames the door, creates a consistent reveal and connects with the baseboards and other trim in the room.
In Toronto renovations, casing may have to deal with:
- plaster that is proud of the jamb
- drywall that is recessed
- changing wall thickness
- old casing profiles
- uneven headers
- baseboards that do not align with the new trim
- simple modern profiles that leave little room to hide errors
Existing casing can sometimes remain.
But if it is damaged, heavily painted, poorly fitted or out of proportion with the new doors, replacing it may give the opening a more complete result.
For broader casing, baseboard and jamb-extension work, visit Finish Trim Carpentry.
Doors That Rub, Swing Open or Refuse to Latch
A poorly operating door does not always need replacement.
Loose hinges, jamb movement, paint buildup, floor changes and seasonal movement can all cause a door to rub or stop latching.
The symptom does not always reveal the cause.
Moving the strike plate may make the latch catch temporarily, but it will not correct a sagging door or twisted jamb. Planing the slab may create more clearance, but it may also leave an uneven reveal if the real problem is hinge alignment.
Before ordering a replacement, it is worth understanding what is actually happening.
See Why Your Interior Door Rubs, Sticks, Swings Open or Won’t Latch.
Owner-Led Interior Door Installation in Toronto
Wood Job is intentionally small and owner-led.
The person discussing the opening stays close to the work and the finished result.
That matters because interior door installation involves small decisions made on site.
A slab may need to be trimmed differently than expected. A hinge mortise may need correction. A jamb may need reinforcement. Casing may need to be fitted against uneven plaster. A late material delivery may change the order of work.
These details should not be passed through several people who are disconnected from the installation.
At Wood Job, the name, the hands and the responsibility stay connected.
Interior Door Installation Cost in Toronto
The cost of interior door installation depends on more than the number of doors.
A simple slab replacement in a clean frame is different from installing 7-foot solid-core doors, correcting an older jamb, fitting casing against plaster or building a custom solution for a non-standard opening.
Cost can be affected by:
- slab door or prehung unit
- hollow-core or solid-core construction
- door height and weight
- condition of the existing jamb
- hinge and hardware preparation
- resizing and floor clearance
- casing on one side or both sides
- glass or double doors
- custom jambs and wall thickness
- old-door removal
- access and working conditions
- painting and finishing expectations
For Wood Job’s current labour starting prices and scope explanations, see How Much Does Interior Door Installation Cost in Ontario?
What to Send for a Toronto Door Installation Estimate
Clear photos are the best starting point.
Send photos of every opening from both sides. Include close-ups of the hinges, latch, strike plate, jamb, casing and bottom clearance.
Please also include:
- the number of doors
- approximate door sizes
- the Toronto project location
- the type of home or building
- slab or prehung preference, if known
- hollow-core or solid-core preference
- whether casing is staying or being replaced
- whether hardware has already been purchased
- photos of rubbing, damage or uneven gaps
- whether the home is occupied or under renovation
- any building access or elevator requirements
If a door does not operate properly, a short video can also help.
Photos may be enough to begin with a rough estimate. Older openings, full-home packages, double doors or custom jamb conditions may need a walkthrough before the final scope is confirmed.
Interior Door Installation Questions
Can you install new doors in old Toronto frames?
Sometimes. If the existing jamb is solid, reasonably straight and worth keeping, a new slab door may be fitted into it. Older plaster walls, settled framing, damaged hinges or badly twisted jambs may make a new frame or custom jamb the better option.
Do you install solid-core interior doors in Toronto?
Yes. Wood Job installs solid-core bedroom doors, bathroom doors, office doors, shaker doors, tall doors and other interior door styles. Because solid-core doors are heavier, the jamb and hinge support should be checked first.
Can you install 7-foot or taller interior doors?
Yes, where the opening and project conditions are suitable. Taller doors need careful hinge preparation, strong jamb support and consistent reveal lines because small alignment problems are more visible across the longer slab.
Do you install glass double doors and French doors?
Yes. Wood Job installs glass double doors, French doors and room-separation systems. Double doors need careful alignment at the meeting point, matching hardware positions and balanced gaps around both slabs.
Can you replace doors without removing the casing?
Sometimes. If the jamb and casing are in good condition, slab replacement may allow the surrounding trim to stay. If the frame is damaged or the casing no longer suits the new doors, replacing the full opening may give a better result.
Can you fit doors into older plaster-wall openings?
Often, yes. The wall and jamb conditions should be checked first. Uneven plaster and changing wall depth may require custom jamb preparation, extensions, scribing or more careful casing work.
Do you take focused door-and-casing projects?
Yes, depending on the scope, location and scheduling. A homeowner may need only solid doors and casing rather than a full-home trim package. Photos and a clear door count help determine whether the project is a practical fit.
Can you fix doors installed poorly by someone else?
Often, yes, although the available correction depends on the existing condition. Hinges, latch alignment, jambs, casing and door clearances can be reviewed to determine what can be adjusted and what may need replacement.
Can you provide an estimate from photos?
Clear photos, door counts and basic dimensions are often enough to begin a rough estimate. Older openings, plaster walls, custom jambs, double doors and larger projects may need an in-person walkthrough.
Do you only install interior doors in Toronto?
No. Wood Job Finish Carpentry also provides owner-led interior door installation across Oakville, Milton, Burlington, Mississauga, Cambridge, Guelph, Kitchener, Hamilton, Vaughan and surrounding areas.
Related Services for Toronto Homeowners
Toronto Finish Carpentry
For interior doors, trim, baseboards, casing, wall paneling, crown moulding, fireplace details, flooring transitions and renovation finishing in Toronto, see the local service page:
Interior Door Installation
For the main door installation service page, including solid-core doors, slab doors, prehung doors, casing, jambs, hardware and custom fitting:
Finish Trim Carpentry
For door casing, window casing, baseboards, shoe moulding, jamb extensions, trim transitions and renovation finishing:
Door Problems and Repairs
If a door rubs, sticks, swings open or will not latch, the issue may be the hinge, jamb, floor, latch, strike plate or the opening itself:
Interior Door Installation Cost
Before requesting an estimate, you can review our 2026 Ontario interior door installation labor price guide.